Welcome to Cheerico Macaron Stand!

7 Tier Mirrored Effect Maypole Acrylic Round Cupcake Stand

Code:RMAY7-MIR

Be the first to review this product

Availability: In stock

$159.00
OR

Quick Overview

This 7 Tier Round Cupcake Stand can be used as 7 tier or smaller tier. It is specially designed so it can be used as smaller cupcake stand.
All tier can be used as top tier or bottom tier.
The entire size: 
Length 450 * Width 450 * Height 629mm 
Length 17.7" Width 17.7" Height 24.7" 
This stand will hold around 112 cupcakes.

7 Tier Mirrored Effect Maypole Acrylic Round Cupcake Stand

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Product Description

7 Tier Mirrored Effect Maypole Cupcake Stand

The 7 Tier Mirrored Effect Maypole Cupcake Stand is our best selling 7 tier cup cake stand. It is held together by central rod fixed with screws for strength and stability. This stand will hold around 112 cupcakes.

The entire size: 
Length 17.7" Width 17.7" Height 24.7"
Length 450 * Width 450 * Height 628mm 

Tier1: Dia 150mm, (5.9")
Tier2: Dia 200mm, (7.9")
Tier3: Dia 250mm, (9.8")
Tier4: Dia 300mm, (11.8")
Tier5: Dia 350mm, (13.8")
Tier6: Dia 400mm, (15.7")
Tier7: Dia 450mm, (17.7")

# 1st,2nd,3rd,4th,5th,6th tier is 4mm (0.16") thick, 7th tier is 5mm (0.2") thick 

Packaging:
Flat packed in cardboard carton, each component is protected with bubble wrap.

Contents:
Tier plates x 7
Rod pillars x 6
Screws x  7

Assembly Instructions: very simple and quick to assemble. Simply fasten each screw to the corresponding rod, there is no need for glue or other fixings/hardware. The mirrored effect plate makes your cakes more lively with the reflections. It definitely shows that you have more cupcake to share around.

Our Cheerico Mirror Effects Cupcake stand can be taken apart, washed and stored away for another time. This cupcake stand can be used as a 7 tier stand or you can remove the top plates and use it as a 6 tier, 5 tier, 4 tier etc.

Below you will find an example of how many cupcakes can be arranged on each tier.



Download Assembly instructions for Round Maypole Mirror Cupcake Stand

PLEASE NOTE: You must remove the manufacturers’ thin layer of protective cover off the top of the mirror plates before assembling this product. Do not tear the white base as it will damage the mirror plate. Leave the white base as it is. The stand is not designed to move around once built so construct it in its final resting place. Do not attempt to move the stand once it has cakes on it.

ASSEMBLY GUIDE:

Parts: Mirror plates, head screws, double screws, acrylic rods and acrylic feet.

* Remove the protective cover from the top of the plate. The base of the mirror plate is white in color. Do not tear the white base as it will damage the mirror plates.
* Begin by placing the feet to the underside of the bottom plate ensuring they are evenly spaced. Acrylic feet are not adhesive so any mirror plate can be used as bottom tier.
* Take a metal head screw and place it on to a flat surface where the stand is to be constructed.
* Carefully line up the hole(s) of the largest plate with head screw ensuring the plate is resting securely on the acrylic feet.
* Now screw the first rod onto the screw thread of head screw making sure the mirror plate is clamped firmly between two acrylic rods.
* Continue by placing the next largest plate on to the screw thread of rod and tighten each mirror plate as you go.
* The final rod is to be used as the support for the final tier and the stand is completed by adding the other head screw into the top.

CARE GUIDE:

* The stand is made from acrylic which will scratch if it is not looked after properly. 
* To clean the product use warm water with a little washing-up liquid and soft cloth. 
* Do not use any abrasive cleaning products as they will make the acrylic. 
* Do not put the stand in a dishwater

ater

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.