Welcome to Cheerico Macaron Stand!

7 Tier Step Mirrored Effect Cupcake Stand


Be the first to review this product

Availability: In stock


Quick Overview

This 7 Tier Step Round Cupcake Stand can be used as 7 tier or smaller tier. It is specially designed so it can be used as smaller cupcake stand. 

The entire size: 
Length 450mm(17.7')  
Width 450mm(17.7')  
Length 629mm (24.7')

This stand will hold around 112 standard cupcakes.

7 Tier Step Mirrored Effect Cupcake Stand

Double click on above image to view full picture

Zoom Out
Zoom In

More Views

Product Description

7 Tier Round Mirror Effect Step Cupcake Stand

The entire size: 

Length 17.7" Width 17.7" Height 24.7"
Length 450 * Width 450 * Height 628mm 

Tier1: Dia 150mm, (5.9")
Tier2: Dia 200mm, (7.9")
Tier3: Dia 250mm, (9.8")
Tier4: Dia 300mm, (11.8")
Tier5: Dia 350mm, (13.8")
Tier6: Dia 400mm, (15.7")
Tier7: Dia 450mm, (17.7")

# 1st,2nd,3rd,4th,5th,6th tier is 4mm (0.16") thick, 7th tier is 5mm (0.2") thick 

Flat packed in cardboard carton, each component is protected with bubble wrap.

Tier plates x 7
Supporting Pieces x 14
Arcylic Feet: 4

There is no need for glue or other fixings.
The edges of the acrylic are perfectly clear and polished.
Every part of the stand has been accurately cut and finished
Can be taken apart, washed and stored away for another time.
The stand comes flat packed and only takes a few minutes to assemble.

This cupcake stand can hold approximately 112 cupcakes.We base our numbers on using a 50mm diameter cupcake.

Below you will find the diagrams for each of our stands telling you exactly how we arranged the cakes on to each tier. 


Assembly Guide

 * Remove the manufacturers’ protective cover of each component.
* Starting with the largest tier (the bottom one), place the acrylic dis on a clean flat surface, The stand is not designed to be moved around once built so construct in its final resting place. Do not attempt to move the stand once it has cakes on it.
* Take the 2 largest support pieces and fit them into the acrylic disc as shown. Please note these 2 pieces are slightly difference and will only fit together correctly in one way.
* Once the bottom layer is complete you can begin to add the following tiers on the top in the same way.


* The stand is made from acrylic which will scratch if it is not looked after properly. 
* To clean the product use warm water with a little washing-up liquid and soft cloth. 
* Do not use any abrasive cleaning products as they will make the acrylic. 
* Do not put the stand in a dishwater

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.